Benefits for our clients(better performance)

• No oil temperature changes, etc.
• Infinite and very accurate control of Speed, Position and Force.
• Since there are no massive ongoing problems, such as to repair oil hoses, cylinders or seals, electric actuators are very low maintenance.
• Reduce Factory cost of expensive maintenance. Such as site engineers necessary training, complete risk assessments, authorize and book the downtime with the production planning.
• Because of the precision patented Roller Screw Design of Exlar Actuators and increased contact surface, its lifetime is usually approx. 10 years.
• Longer tool life virtually guaranteed. No slamming of the mold hence less stress.
• Electric actuators are faster and sooner start up as well as being possible to overlap movements. Compare to the same type of machine driven by servo-pump with a fastest cycle time of around 12 seconds, the electric technology can achieve to 6 seconds.

Environment friendly(Benefits over Hydraulic systems)

• Since there is no dirty oil contamination issues, electric linear motion is a CLEAN technology which preferred by industry.
• No power consumption during stopped motion while hydraulic systems keep using energy to run the pump for maintaining pressure.
• The noise level in the actuators is much lower.

Energy Saving

• In rough calculation, comparing the motion energy consumption of variable pump technology to full electric technology in a cycle time of 12 seconds, the later is 86 % lower. If compared with a servo-pump system, it is 69 % lower.